Air/Hydraulic Tools

 

V-2/79014

This value-priced tool sets 3/32” – 3/16” diameter rivets in all materials.  Weighing only 3.2 lbs, the V-2 maintains a pulling force of 1,940 lbs. with a stroke of .551”.

 

V-4/79060

The cost-efficient V-4 tool sets 3/32” – 1/4” diameter rivets in all types of materials.  In addition, the V-4 can also set structural blind rivets.  It weighs 4.2 lbs. with a pulling force of 3,055 lbs. with a stroke of .562”.

 

39054/M-3

This heavy-duty air/hydraulic riveter with its newly designed aluminum forged head can hold up under demanding continuous use. The aluminum forged head allows for continuous full operating power and less internal wear. The M-3 will set blind rivets from 1⁄8" diameter in all alloys, up to 3⁄16". Included with the M-3 are standard 1⁄8", 5⁄32", and 3⁄16" nosepieces, a service wrench, swivel inlet air coupler and a mandrel collection bottle. The recommended airline pressure is 85-95 PSI. Weight: 4.2lbs.

 

39058/M-4

This heavy-duty air/hydraulic riveter with its newly designed aluminum forged head can hold up under demanding continuous use. The aluminum forged head allows for continuous full operating power and less internal wear. The M-4 can set rivets from 3⁄32" through 1⁄4" diameter in all alloys, and it also has the capability of setting 3⁄16" and 1⁄4" T-Rivets/Klik-Split®, Klik-Lock™* and all other structural blind rivets (special optional nosepieces may be required). The M-4 is supplied with 3⁄32", 5⁄32", 3⁄16" and 1⁄4" standard nosepieces, service tools, swivel inlet air coupler and a mandrel collection bottle. The recommended airline pressure is 85-95 PSI. Weight: 6.6 lbs.

Air/Hydraulic Rivet Tools — Standard & Special Nosepieces

T-Rivets/Klik-Split®
Tool Standard Structural*
  3⁄32" 1⁄8" 5⁄32" 3⁄16" 1⁄4" 3⁄16" 1⁄4" 3⁄16" 1⁄4"
39054   95715 95716 95717          
39058 95897 95898 95899 95900 95835 95903 95905 95904 95906
79014 95761 95762 95763 95760          
79060 95897 95898 95899 95900 95835 95903 95905 95904 95906

*For Monobolt® structural rivets, the noted special nosepiece is required. For Marson brand Klik-Lok® structural rivets, no special nosepiece is required.

Air/Hydraulic Rivet Tools — Capacity Chart

Riveter Model Steel All Aluminum Aluminum/Steel
  3⁄32" 1⁄8" 5⁄32" 3⁄16" 1⁄4" 3⁄32" 1⁄8" 5⁄32" 3⁄16" 1⁄4" 3⁄32" 1⁄8" 5⁄32" 3⁄16" 1⁄4"
39054    •       •       •   
39058 •   •  •   •  •   • 
79014 •   •     •   •    •   •   
79060 •   •   •  •   •  •  •   •  • 

 

 

Copper 
Riveter Model Stainless Steel Structural*  “T” Rivets
  3⁄32" 1⁄8" 5⁄32" 3⁄16" 1⁄4" 1⁄8" 3⁄16" 1⁄4" 3⁄16" 1⁄4" 
39054    •     •         
39058 •   •   • 
79014 •   •     •         
79060 •   •   •   •